The Swenson Bobcat and Alchemy’s RestoMod: The 1968 Original and the Tribute
Alchemy Custom Weaponry’s Swenson Bobcat RestoMod is a limited run of 35 pistols. Each copies the Bobcat that Air Force enlistee Jim Wood ordered from Armand Swenson in 1968. Here is the original set beside the tribute, with the details Alchemy reproduced and the ones it changed.
Key Takeaways
- Alchemy made the Swenson Bobcat RestoMod as a run of 35 pistols, serial-numbered BOBCAT001 through BOBCAT035. All of them copy one pistol: the Bobcat James “Jim” Wood Jr. ordered from Armand Swenson in 1968.
- A Bobcat was Swenson’s Colt Government Model cut down to Commander size, made when Colt built the Commander only with an aluminum frame. Colt did not offer the steel-frame Combat Commander until 1970.
- Alchemy kept the original’s Smith & Wesson K-frame rear sight, square trigger guard, scalloped frame, and two-tone finish. It changed other details, adding an orange-bladed front sight, a chromium nitride frame, a Novak thumb safety, and its own RestoMod Series markings.
Alchemy Custom Weaponry, a division of Cabot Guns, made its Swenson Bobcat RestoMod as a limited run of 35 pistols, serial-numbered BOBCAT001 through BOBCAT035. It is not a general tribute to Armand Swenson’s style. It copies one particular pistol: a Bobcat that Air Force enlistee James “Jim” Wood Jr. ordered from Swenson in 1968. [1]
Armand Swenson and the Bobcat
Swenson was a Swedish gunsmith who worked a day job at Boeing. By the mid-1960s he was modifying Colt Government Models for the combat matches that Jeff Cooper’s South West Combat Pistol League held in Southern California. He worked first from a shop in Gardena, California, and later from Fallbrook. Many of his customers were soldiers and Marines on their way to Vietnam. [2]
His usual work included several features:
- Adjustable rear sights taken from Smith & Wesson K-frame revolvers
- Serrated ramp front sights that he machined one at a time
- A trigger guard welded square, then filed and checkered by hand
- A checkered front strap and a beveled magazine well
- A lowered ejection port
- A matte hard-chrome finish
He stippled slide tops by hammering a rat-tail file into the steel, and he trimmed the slide edges with a fine line he called a “French border.” [2]
On April 5, 1968, Swenson filed for a patent on a right-side thumb lever, giving his address as 3223 W. 145th St., Gardena. The lever connects to the factory left-side safety through its shaft, so the original safety still works as designed. The patent was granted as U.S. Patent 3,492,748 on February 3, 1970. [3] A 1966 Colt Super 38 sold by Rock Island Auction Company in 2021 shows how he marked his work. It is stamped “A.D. SWENSON/GARDENA, CALIF.” on the right side of the slide, between the Rampant Colt and the slide serrations, and again on the frame below the serial number. It also carries his Smith & Wesson-style adjustable rear sight. [4]
The Bobcat was Swenson’s shortened Government Model. It was cut down to match Colt’s Commander, which at the time Colt made only with an aluminum frame. [1] Colt introduced the Commander in 1950 with a 4.25-inch barrel, as the company’s first full-size pistol with an aluminum-alloy frame. The steel-frame Combat Commander did not arrive until 1970, when the alloy version was renamed the Lightweight Commander. [5] Before Colt offered a steel Commander itself, some shooters bought Commander slides and barrels and fitted them to steel frames. [6]
The Historical Example: Jim Wood’s Bobcat
Alchemy’s account is based on Swenson’s correspondence with Wood. Wood sent a Colt Government Model to Swenson in 1968, and the two exchanged letters about options and prices. Across the top of one letter, Swenson wrote that the recommended work was “What I would bring to Vietnam with ME!” The pistol was finished in 1969. Wood carried it in Southeast Asia in an M3 shoulder holster under his fatigue jacket and brought it home afterward. [1]
Alchemy published photographs of the original beside the RestoMod. The original still has Colt’s Hartford address on the right side of the slide. It has a two-tone finish with a worn blued slide and a bright frame, a square trigger guard, a checkered front strap, and skip-line checkered stocks. Alchemy also notes that the original has a silver-soldered Swenson thumb safety and a frame with scallops. [1]
The Contemporary Tribute: The Swenson Bobcat RestoMod
The RestoMod is a .45 ACP 1911 with a 4.25-inch barrel. Its slide is blued with polished flats, and its frame and small parts are finished in chromium nitride. The slide has a matted top, a Smith & Wesson K-frame revolver rear sight, a custom ramped front sight with an orange blade, and vertical cocking serrations. The back of the slide is also serrated, which Alchemy says is a first for its RestoMod series. [1]
The frame has a square trigger guard, scallops, 20-lines-per-inch front-strap checkering, and an arched, serrated mainspring housing with a lanyard loop. The stocks are Herrett’s D45 skip-line checkered. Other parts include a Novak thumb safety, a ring hammer, and a full-length guide rod. Each pistol comes with two Chip McCormick eight-round magazines, a certificate of authenticity, and a felt-lined wooden cigar box. Alchemy listed it at $5,950. The left side of the slide is marked “RESTOMOD SERIES,” with the ACW logo and “AUTOMATIC CALIBER .45.” [1]
Reproduced and Reinterpreted
Several features carry over directly from the original. Alchemy kept the Bobcat’s Commander-length proportions [1]. It also kept the Smith & Wesson K-frame rear sight, which Swenson fitted by milling the slide by hand [1][2]. The square trigger guard stays as well: Swenson made his by welding the guard square, then filing and checkering it by hand [2]. The RestoMod also keeps the scalloped frame and the two-tone pairing of a blued slide with a bright frame, both copied from Wood’s pistol [1].
Other features are reinterpreted. Swenson machined each serrated ramp front sight himself and dovetailed it into the slide [2]. The RestoMod instead has a custom-made ramp with an orange blade [1]. Swenson stippled slide tops with a hammered file and then bead-blasted them [2], while the RestoMod’s slide top is matted. Alchemy says the matting hides the rough hand work of fitting the larger K-frame sight to the slide [1].
The finish and parts differ too. Swenson’s slide-edge line was what he called a “French border” [2], and Alchemy lists “American” borders on the RestoMod [1]. Swenson’s own finish was matte hard chrome [2], but the RestoMod’s frame is chromium nitride [1]. Wood’s pistol has a silver-soldered Swenson thumb safety, and Swenson also patented an ambidextrous design [1][3]. The RestoMod uses a Novak thumb safety modeled on the original [1].
The markings follow the same pattern. Swenson stamped his name and Gardena address on the guns he modified [4]. The RestoMod carries Alchemy’s RestoMod Series markings instead [1]. The cigar box comes from the original’s history: Alchemy says Swenson kept the guns he was working on in cigar boxes around his shop. [1]
Frequently Asked Questions
Which original custom inspired the Alchemy Swenson Bobcat?
It copies the Bobcat Armand Swenson built for Air Force enlistee James “Jim” Wood Jr., who ordered it in 1968 and received it in 1969. Wood carried the pistol in Southeast Asia in an M3 shoulder holster.
What is a Swenson Bobcat?
A Bobcat is a Colt Government Model that Swenson shortened to the dimensions of Colt’s Commander. At the time, Colt made the Commander only with an aluminum-alloy frame.
How many Swenson Bobcat RestoMods did Alchemy make?
Alchemy made 35, serial-numbered BOBCAT001 through BOBCAT035. Each is a 4.25-inch .45 ACP pistol and ships in a wooden cigar box with a certificate of authenticity.
Which details did Alchemy reproduce, and which did it reinterpret?
Alchemy reproduced the K-frame revolver rear sight, square trigger guard, scalloped frame, and two-tone pairing of a blued slide with a bright frame. It reinterpreted the front sight with an orange blade, used chromium nitride instead of hard chrome, fitted a Novak thumb safety, and marked the slide as part of its RestoMod Series.
How was Armand Swenson’s work marked?
One documented example is a 1966 Colt Super 38 sold by Rock Island Auction Company in 2021. It is stamped “A.D. SWENSON/GARDENA, CALIF.” on the right side of the slide and on the frame below the serial number.
Sources
[1] Alchemy Custom Weaponry. “Bobcat.” Alchemy Custom Weaponry, n.d.
[2] American Rifleman. “The Evolution of the Custom Combat .45.” American Rifleman, National Rifle Association, March 1, 2011.
[3] Swenson, Armad D. “Pistol Safety Mechanism Adapted for Right or Left Hand Operation.” U.S. Patent 3,492,748, filed April 5, 1968, issued February 3, 1970.
[4] Rock Island Auction Company. “Lot 511: Swenson Upgraded Colt Super 38 Semi-Automatic Pistol.” Premier Firearms Auction #84, December 3, 2021. Auction estimate $1,800 to $2,750.
[5] American Rifleman. “TALO/Colt 21st Century Commander.” American Rifleman, National Rifle Association, May 24, 2011.
[6] Clapp, Wiley. “Fightin’ Iron: The History of the Combat Commander.” Shooting Illustrated, National Rifle Association, July 19, 2021.
Browse our current Alchemy Custom Weaponry inventory, available for purchase.


