Luxus Collection
Account
Home›Resources on Guns›Léon Crottet
Léon Crottet
Léon Crottet
Resources on Guns

Léon Crottet

Thurgau gunsmith whose half-scale working miniatures reproduce historic arms down to rifling and cartridges.

Founded1975
LocationCanton of Thurgau, Switzerland
Shop Léon Crottet →

In 1973 a Swiss precision mechanic set out to build a Parabellum 08 at half size, and only the third grip frame he machined was good enough to keep. Léon Crottet later judged that first piece plainly: its finish and detail fell short of what came after, and it went into a private Swiss collection. Two half-scale Thompson 1921 submachine guns followed in 1974, along with a single Bergmann-Bayard 1910; the deep-drawn parts of the Thompson’s drum magazine, he recalled, gave him the most trouble while his methods were still unsettled. He had also built a one-off study of the Bergmann-Bayard in the early 1970s, working from photographs, in 9 mm kurz and only slightly smaller than the original.

Crottet trained as a Feinmechaniker (precision mechanic) and states that he established his business in the canton of Thurgau in 1975, trading in arms and ammunition and taking on gunsmithing work. The limited-liability company that now carries his name, Waffen Crottet GmbH, was entered in the Thurgau commercial register in December 1986 and took over assets from Léon Crottet and Elisabeth Crottet-Scheuber; its registered purpose includes developing and producing arms, in particular miniature arms. The company’s seat is the municipality of Fischingen, and its workshop address is in the village of Oberwangen. Gunsmithing and the arms trade were the firm’s day-to-day business; by his own account, the half-scale models were the work he cared about most.

Every Crottet model is built at 1:2, half the length and one-eighth the volume of the original, and he puts the labor at 300 to 500 hours per piece. Before a series could begin he made the cutters, fixtures and press, stamping and drawing tools it required, and he states that a series was normally limited to five numbered examples, each delivered with a certificate and a parts list recording the material, heat treatment, finish and hours for every component. Barrels are rifled, deep-hole drilled and honed, with the rifling cut on a machine he built or the blanks made to his specification by Lothar Walther. The earliest models came with dummy cartridges only; he then taught himself to draw brass cases and make jacketed bullets, and the later models fire live half-scale ammunition. Crottet reports that the federal arms office in Bern advised him in writing that the models fall outside the regular Swiss weapons law because no commercial cartridge fits them. An independent account from 1980 put a Crottet Colt .45 at about 250 hours and a Thompson at about 380.

Through the late 1970s and the 1980s his subjects were mostly Swiss and German service arms: the Swiss 1872 and 1872/78 Chamelot-Delvigne-Schmidt revolvers in 1977 and 1978, the Parabellum 1902 in 1979 and 1980, the Swiss Pistole 49 (SIG P210-2) in 1980 and 1981, several versions of the Swiss-pattern Parabellum 1900 during the 1980s, and a six-shot Cone Hammer Mauser C96 in 1985 and 1986, for which he built a dedicated slotting machine to reach inside the one-piece barrel and receiver. A run of five Parabellum 1902 “Cartridge Counter” models went to the United States in the white in the early 1980s and was fitted with grips there. The Walther G43 took more than four years: five working rifles and two cutaways, each with a laminated stock and a working ZF4 telescope, completed in 1990. Deutsches Waffen-Journal first published one of his models, a Luger 1908, in January 1976, and later put his Swiss 1900 (December 1979) and the G43 (December 1991) on its covers. John Walter’s The Luger Book (1986) pictures Crottet examining one of his half-size Parabellums.

Alongside the miniatures, Crottet tuned full-size SIG P210 pistols for decades and states that the P210-8 developed from his modifications in cooperation with SIG. Lorenz Vetter’s history of SIG pistols, as summarized on the Luxus Capital site, lists a “Combat-Crottet” prototype dated 1976 to 1983 and says SIG reserved serial numbers for a P210-8 Combat-Crottet in 1982 before withdrawing in 1983. The later miniatures included a SIG 47/8 in 1993 and 1994, made with technical help from SIG and accompanied by a 2.8 mm rimfire conversion unit; a Mauser 06/08 in 1994 and 1995 that reproduces the flap-locked action; a Parabellum carbine in 1998 and 1999; and an ERMA MP38 from 2000 to 2002, with Bakelite parts pressed in tooling he made for it. An FG42 Model 1 with milled receiver was in progress at the end of 2003 and was offered for sale, together with the MP38, by February 2004. Crottet writes that he stopped making models after a final series of Sten MkII submachine guns; two American magazine articles describe a Crottet Sten MkII miniature that fires on full automatic.

Crottet states that he retired in May 2012 and still takes on occasional demanding work in the shop. The company remains active in the commercial register, with him as its sole member and managing officer. For collectors, the maker’s own record is unusually detailed, giving series dates and quantities piece by piece, and surviving examples carry series numbers: a Swiss 1900 model catalogued by Rock Island Auction is marked 2/5. Attributions should be checked against that record, since some dealer descriptions credit Crottet with subjects that do not appear on his own list of works.

Léon Crottet

History & Milestones

1973

First half-scale Parabellum 08 attempted

Crottet made his first model arm, a half-scale Parabellum 08, keeping only the third grip frame he machined. He describes its finish and detail as below his later work.

1974

Thompson and Bergmann-Bayard models completed

Two half-scale Thompson 1921 submachine guns and a single Bergmann-Bayard 1910 were finished, the Thompson’s drum magazine proving the hardest part.

1975

Business established in the canton of Thurgau

Crottet states that he founded his arms trading and gunsmithing business in Thurgau in 1975. The same year he made a series of three half-scale Colt 1911 pistols.

1976

First Crottet model appears in print

Deutsches Waffen-Journal published his half-scale Luger 1908 in January 1976, the first press coverage of his models according to the maker.

1980

Popular Mechanics surveys Crottet’s half-scale work

A March 1980 survey of miniature makers described his Colt and Thompson models, their working mechanisms, and the hours each required.

1986

Waffen Crottet GmbH entered in register

The limited-liability company was registered in Thurgau in December 1986, taking over assets from Léon Crottet and Elisabeth Crottet-Scheuber. Its registered purpose names the production of miniature arms.

1990

Walther G43 series completed after four years

Five working G43 models and two cutaways, with working ZF4 optics and live ammunition, were completed in 1990. Deutsches Waffen-Journal put the model on its December 1991 cover.

2000

ERMA MP38 half-scale series begun

Work on the MP38 series ran from 2000 to 2002 and required press tooling for its Bakelite parts.

2004

FG42 Model 1 offered for sale

The milled-receiver FG42 model, in production at the end of 2003, was offered alongside the MP38 by February 2004.

2012

Crottet retires from regular workshop production

Crottet states that he retired in May 2012 and still takes on occasional work at a reduced level.

Léon Crottet

Model Series & Product Lines

LUXUS
Parabellum 08 study
Est. 1973

Crottet’s first attempt at a model arm, a single half-scale Parabellum 08 whose finish he describes as below his later standard; it is now in a private Swiss collection.

Model Overview
LUXUS
Thompson 1921 submachine gun
Est. 1974

Two half-scale models were made in 1974, and the drum magazine’s deep-drawn parts were the main difficulty. A 1980 account describes the miniature with detachable stock, 50-round drum and 20-round box magazines.

Model Overview
LUXUS
Bergmann-Bayard 1910
Est. 1974

A single half-scale model made in 1974; a separate early-1970s study in 9 mm kurz (.380 ACP), only slightly reduced and built from photographs, preceded it.

Model Overview
LUXUS
Colt 1911 Government
Est. 1975

A series of three half-scale Colt 1911 pistols, made in 1975. A 1980 account estimated about 250 hours of work per Colt.

Model Overview
LUXUS
Chamelot-Delvigne-Schmidt revolvers 1872 and 1872/78
Est. 1977

Half-scale models of both the rimfire 1872 and the centerfire 1872/78 Swiss service revolvers, made in 1977 and 1978 and shown on the maker’s site as a cased pair.

Model Overview
LUXUS
Parabellum 1902
Est. 1979

A half-scale series of the first 9 mm Parabellum, made from 1979 to 1980.

Model Overview
LUXUS
SIG P210-2 (Swiss Pistole 49)
Est. 1980

A series of the Swiss service P210 made from 1980 to 1981, with matching half-scale small-caliber conversion units and 2.8 mm ammunition supplied on request.

Model Overview
LUXUS
SIG 47/8 “Swedish model”
Est. 1993

A series of the P210’s predecessor made in 1993 and 1994 with technical help from SIG, and the first to include a half-scale conversion unit in 2.8 mm rimfire with live rimfire cartridges.

Model Overview
Léon Crottet

Available for Purchase

Shop All →