The Cabot South Paw 1911: Reading the Marks of a Mirror-Image Pistol
Cabot Gun Company introduced the South Paw in January 2012 as a left-handed 1911 built as a mirror image, not a right-handed pistol with two-sided controls added. Comparing serial number 1 with a conventional CGI Classic shows how Cabot moved the ejection port, the controls, and the markings to the opposite side.
Key Takeaways
- Cabot announced the South Paw on January 10, 2012. It described the original edition as a 4140 billet steel pistol with a new gray-tone finish and a Rozic blind front sight, limited to 100 pistols for 2012 at $5,250.
- On South Paw serial number 1, the ejection port, slide stop, thumb safety, magazine release, and slide and frame markings are all on the opposite side from a conventional CGI Classic. The lettering still reads normally.
- Two-sided controls do not make a 1911 left-handed. The side of the ejection port shows whether the slide itself was built as a mirror image.
Cabot Gun Company, LLC, of Cabot, Pennsylvania, announced the South Paw on January 10, 2012, and showed it at Media Day and the SHOT Show in Las Vegas, January 16 through 20, 2012. The company’s release called the pistol a true left-handed 1911 and “a truly inverted 1911.” The pistols were made in collaboration with Penn United Technologies, Inc., a precision manufacturer, at 799 North Pike Road in Cabot. The Cabot trademark had been launched on April 26, 2011. [1]
How Cabot Described the Original Edition
Cabot’s 2012 release and its South Paw product page gave the same core specification. The pistol was machined from 4140 billet steel to what the company called extreme tolerances and was designed to exceed National Match accuracy standards out of the box. Cabot developed a new gray-tone finish for the model and offered grips of California olive wood, box elder, or walnut milled on the Jones family farm behind the shop. [1][2]
The front sight was new as well. Cabot called it the Rozic blind sight. Instead of being staked from the top of the slide, it was dovetailed in from the front, and it came with a white dot, tritium, or gold dot. Production was limited to 100 South Paw pistols for 2012, and the release priced the pistol at $5,250. In the same release, Cabot president Robert Bianchin explained the model by noting that 12 percent of shooters are left-handed. [1][2]
Serial Number 1 and Its Right-Handed Counterpart
The first South Paw was offered as Lot 3702 at Rock Island Auction Company’s Premier Firearms Auction #87 on December 11, 2022. Its frame is marked “PENN UNITED TECHNOLOGIES / CABOT, PA / LEFTY0001.” The pistol is a .45 ACP with a 5-inch barrel, gray finish, and burl maple grips. It came with a hand-numbered box and a certificate of authenticity signed by Robert Bianchin as president and dated May 7, 2012. The certificate identifies the pistol as serial number 1 of the South Paw model, built during the company’s first year of operation. The auction house catalogued the South Paw as the left-handed version of the CGI Classic, one of Cabot’s earliest models. [3]
Lot 3701 in the same sale was a conventional right-handed CGI Classic. It was blued, had antique ivory grips, and carried the frame marking “PENN UNITED TECHNOLOGIES / CABOT, PA / CGXPUT035.” When the two pistols are photographed in the same left-side and right-side views, they show exactly which features Cabot moved. [3][4]
The Visible Mirrored Details
The ejection port is the most obvious change. It is on the right side of the slide on the CGI Classic and on the left side of the slide on the South Paw. The controls are reversed as well. The CGI Classic has its slide stop lever, thumb safety, and magazine release button on the left side of the frame, with the release button behind the trigger guard. The South Paw has all three on the right side of the frame, with the release button in the same position behind the trigger guard. The slotted end of the magazine catch is on the right side of the CGI Classic and on the left side of the South Paw. [3][4]
The markings are mirrored too. The CGI Classic carries its model marking, “CGI/CLASSIC,” on the forward part of the slide’s right side. The South Paw carries “SOUTH PAW,” with a paw print, on the forward part of the slide’s left side. “CABOT GUNS / MADE IN THE USA” is on the left side of the slide on the CGI Classic and on the right side on the South Paw. The frame block with the maker, location, and serial number sits above the front of the grip on the right side of the CGI Classic and in the same position on the left side of the South Paw. [3][4]
The lettering itself reads normally on both pistols. Cabot moved each marking to the opposite side and did not reverse the text. As a result, a South Paw’s left side looks like a conventional Cabot’s right side, with the port and serial block, and its right side carries the controls and the company name. [3][4]
Several differences between these two pistols are not part of the mirroring. Serial number 1 has a gray finish, a skeletonized hammer, and maple grips. The CGI Classic is blued, with a spur hammer and ivory grips. These are configuration choices and do not identify a left-handed gun. [3][4]
Some mirrored parts cannot be seen from outside. For the later S103 Limited South Paw, Cabot re-engineered 10 components in reverse: the frame, slide, slide stop, thumb safety, grip safety, sear spring, magazine release, magazine, ejector, and extractor. All of them were made in-house. Cabot offered its single-stack .45 ACP magazines in right-hand, left-hand, and ambidextrous configurations, and in 2017 it offered its South Paw variants only in .45 ACP. [5] In 2013 Cabot launched its Mirror Image Pistol Set program, which offered identically inverted left- and right-handed versions of the Jones 1911, Jones Deluxe, National Standard, RangeMaster, and American Joe. At that launch, Bianchin said the left-handed gun’s rifling twist was also reversed. [6]
Mirrored Manufacture Versus Two-Sided Controls
An ambidextrous thumb safety or a reversible magazine release lets a left-handed shooter operate a conventional 1911, but the frame and slide remain right-handed. The ejection port is still cut into the right side of the slide, and the slide stop lever stays on the left. On a South Paw, the port is on the left side of the slide and the slide stop lever is on the right side of the frame. The side of the port therefore identifies a mirrored slide, whatever controls are fitted. [3][4]
Cabot’s 2016 announcement of the S-100 Edition, as published by Shooting Illustrated, made the same distinction. It said the company had gone beyond ambidextrous safeties and reversible magazine releases to invert the 1911 design. [7] The S103 Limited South Paw that American Rifleman tested in 2017 had a thumb safety on the right side only, not a two-sided one. [5]
Later Editions
The S-100 Edition was announced in September 2016. It was built in 416 stainless steel, with an optional black nitride finish, a 5-inch match-grade barrel, a reverse-dovetail front sight, and Cabot’s Trinity stripe rear slide serrations. Its announced base price was $4,045. [7] The 2012 edition, by contrast, was 4140 billet steel with a gray-tone finish. [1][2]
The S103 Limited South Paw is a Commander-pattern pistol with a 4.25-inch barrel on a full-size frame. Cabot’s Full-Cycle Technology keeps the longer slide rails and cycle length of the Government-size 1911, and the pistol uses Series 70 lockwork. American Rifleman’s test gun paired a satin stainless slide and frame with a black steel grip safety, thumb safety, and slide lock. [5]
Frequently Asked Questions
What is the Cabot South Paw?
It is a left-handed 1911 that Cabot Gun Company of Cabot, Pennsylvania, announced on January 10, 2012, and showed at the 2012 SHOT Show. Cabot built it as a mirror image of its right-handed pistols.
Which visible details are mirrored on a South Paw?
The ejection port is on the left side of the slide, and the slide stop, thumb safety, and magazine release are on the right side of the frame. The model name, the “CABOT GUNS / MADE IN THE USA” marking, and the frame serial block are also on the opposite sides from a conventional Cabot.
How did Cabot describe the original 2012 edition?
Cabot called it a true left-handed, truly inverted 1911, machined from 4140 billet steel, with a new gray-tone finish and the Rozic blind front sight. Production was limited to 100 pistols for 2012 at $5,250.
Is a 1911 with ambidextrous controls the same as a South Paw?
No. Ambidextrous controls leave the slide and frame right-handed, so the ejection port stays on the right, while the South Paw’s port is on the left.
What is the serial number of the first South Paw?
Its frame is marked LEFTY0001, and a certificate signed by Robert Bianchin on May 7, 2012, identifies it as serial number 1 of the model. Rock Island Auction Company offered it on December 11, 2022.
Sources
[1] Cabot Gun Company, LLC. “Cabot Guns to Debut Left Handed and Stainless 1911 Pistols at the 2012 SHOT SHOW.” Press release, Cabot Guns, January 10, 2012.
[2] Cabot Gun Company, LLC. “South Paw.” Cabot Guns, n.d.
[3] Rock Island Auction Company. “Lot 3702: Early Cabot Guns Southpaw Semi-Automatic Pistol.” Premier Firearms Auction #87, December 11, 2022. Auction estimate $3,000 to $5,000.
[4] Rock Island Auction Company. “Lot 3701: Early Cabot Guns CGI Classic Semi-Automatic Pistol.” Premier Firearms Auction #87, December 11, 2022. Auction estimate $3,000 to $5,000.
[5] American Rifleman Staff. “Tested: Cabot S103 Limited South Paw.” American Rifleman, November 2, 2017.
[6] Recoil Staff. “Cabot Guns Mirror Image Pistol Set.” RECOIL, March 5, 2013.
[7] Shooting Illustrated Staff. “Cabot Guns Releases New “South Paw” Left-Handed 1911.” Shooting Illustrated, September 9, 2016.
Browse our current Cabot Guns inventory, available for purchase.


