Luxus Collection
Account
ColtColt Python Ray Viramontez Master Engraved.357 Magnum · DA / SA
Contact For Pricing

Colt Python Ray Viramontez Master Engraved

Home›
Shop›
Colt›
Colt Python Ray Viramontez Master Engraved
Colt
SKU: Colt-Pyt-Eng
Donald Glaser Collection

A 1959 Colt Python in .357 Magnum, master-engraved and gold-inlaid by Ray Viramontez in 1981. Made for GRS founder Donald A. Glaser and offered from his collection

.357 Magnum
DA / SA
Barrel 6"
Engraved By
Ray Viramontez
Pricing
Contact Us
Check Shipping Eligibility
Select your state to verify this firearm can be shipped to you.
FFL Transfer Required
All firearms must be transferred through a licensed FFL dealer in your state. Provide your dealer's information at checkout — we ship directly to them. How FFL transfers work →
Share
About This Piece

Colt introduced the Python in 1955 as its finest revolver, and this one left Hartford in 1959, early in the run. Twenty-two years later, it got a second life. In 1981, Master Engraver Ray Viramontez cut and inlaid it for Don Glaser, the man behind GRS, the Kansas company whose tools sit on engravers' benches around the world. One engraver's work, done for another. That's about as tough an audience as you can find.

Viramontez worked in a clean ornamental scroll over a finely punched background. It runs along the underside of the barrel, down both sides of the vent rib, and across the frame, with a panel between each pair of flutes on the cylinder. At the muzzle and on the frame ahead of the cylinder, the scroll winds through flush gold inlay. Thin gold lines border the frame, and gold bands circle the rear of the cylinder. Even the Colt barrel markings were filled with gold, so the Python name reads in yellow against grey steel. Look closer, and you'll find the small stuff got attention too. The trigger is engraved. So are the screw heads.

The whole gun wears a soft satin grey finish, which was the right call. Bright polish would fight the engraving. This lets the cuts and the gold do the talking. Checkered walnut target grips with gold Colt medallions round it out, and the sights are what you'd expect on a Python: a ramp front and an adjustable rear on that familiar ventilated rib.

It's a six-inch gun in .357 Magnum, the classic Python setup. Under the decoration is the same hand-fitted Colt action that gave the model its name.

The revolver stayed with Glaser and came to market from his collection. Condition is very fine, with nearly all of the grey finish and gold intact and crisp checkering on the grips. Custom-engraved pythons turn up now and then. One with a known engraver, a known date, and a first owner who knew exactly what good engraving looks like? That's a much shorter list.

Engraved by Ray Viramontez
Cut and gold-inlaid in 1981 by Master Engraver Ray Viramontez. Ornamental scrollwork covers the barrel, frame, and cylinder.
Made for Don Glaser
Commissioned for the founder of GRS, the engraving tool company. It comes from the Donald Glaser Collection.
Flush Gold Inlay
Gold scroll at the muzzle and frame, gold borders, and gold bands on the cylinder. The Colt barrel markings are gold-filled too.
1959 Colt Python
An early six-inch Python in .357 Magnum. Very fine condition with nearly all of the satin grey finish intact.
Inquire

Questions About
This Piece?

Our team is available to answer questions about specifications, provenance, availability, and FFL transfer logistics. We typically respond within one business day.

Re:Colt, Colt Python Ray Viramontez Master Engraved

We typically respond within one business day.

We'll use your details only to respond to your inquiry. See our Privacy Policy.

More From Colt

You May Also Consider

View All
Learn More

Related Reading

GuideThe Colt StoryArticleWhat Makes a High-End Revolver Collectible?ArticleGeneration, Series and Revision: Three Firearms Terms in Their Original Contexts