Luxus Collection
Account
Home›Resources on Guns›Guncrafter Industries
Guncrafter Industries
Guncrafter Industries
Resources on Guns

Guncrafter Industries

An Arkansas custom 1911 shop built around its own .50-caliber cartridge.

Founded2004
LocationHuntsville, Arkansas, USA
Shop Guncrafter Industries →

The .50 GI cartridge has a rebated rim cut to the same base dimensions as the .45 ACP, and it is loaded to roughly the same overall length. That geometry is the whole premise of Guncrafter Industries: a half-inch bullet in a pistol that keeps the outside dimensions of a standard 1911. The company’s first published factory load drove a 300-grain bullet at 700 to 725 fps, which the company said felt comparable to 230-grain .45 ACP hardball. Cartridge and pistol, the Model No. 1, were shown together at the 2004 SHOT Show in Las Vegas.

The idea belonged to Alex Zimmermann, born in Denmark in 1962, who has written that it came to him while he was studying mechanical engineering there. Danish handgun law kept it on paper. After roughly a decade of travelling to American matches he took a job at Wilson Combat in Berryville, Arkansas, where he spent more than eight years as director of research and development. By his own account he resigned in 2002 to form Guncrafter Industries, then spent two years on prototypes with Vic Tibbets, a pistolsmith who had worked at Wilson Combat for 17 years and run his own shop, Tibbets Classic Customs. The paperwork followed the prototypes. Zimmermann applied to register 50 GI as a trademark for ammunition on 6 October 2003, and Guncrafter Industries, L.L.C. was filed with the Arkansas Secretary of State on 26 November 2003. The company also states that Zimmermann won the IDPA national Stock Service Revolver title seven times in succession.

The Model No. 1 was a custom pistol priced at $2,895 at launch, and the company sold loaded ammunition, brass and dies itself. Because the two cartridges share a base, Guncrafter offered a .45 ACP conversion unit (barrel, magazine, guide rod and spring), hand-fitted to the individual pistol instead of sold as a drop-in part. A railed Model No. 2 with a full-profile slide and full-length dust cover was on the company’s site by January 2007. In 2010 came the Model No. 3, a Commander-length .50 GI with a 4.25-inch bushingless bull barrel. The Model No. 4 stretched the slide and barrel to six inches for handgun hunting. For buyers who would not pay custom-1911 prices, the company developed a .50 GI slide, barrel and magazine assembly for Glock 20 and 21 frames, which Shooting Illustrated reviewed in March 2011 at an MSRP of $595.

The .50 GI gave the shop its name, but most of its later catalog is in conventional chamberings. The American, a railed .45 ACP 1911, was announced as new for 2009. The Pistol with No Name followed in 2010; it carries no slide markings and was the first Guncrafter pistol with the 15 LPI, 90-degree checkering that became a house feature. The FRAG replaced checkering with a pattern modelled on the Second World War fragmentation grenade. In 2016 the company announced the HOSS (Heavy Operating Shooting System), a reworking of seven 1911 parts, among them the extractor, slide stop, barrel link, bushing and barrel. The BC-17 Hellcat of 2017, named for its heavy BattleCrown barrel bushing, was described as the company’s seventeenth 1911-pattern model. The double-stack Hellcat X2 followed in May 2018 in 9mm and .40, with an aluminum grip frame over a steel receiver. The company also finished factory CZ 75 pistols under the name Executive Series.

In April 2026 Wilson Combat announced that it had acquired the Guncrafter Industries brand and assets, returning Zimmermann’s company to the firm he had left in 2002. The release said he would remain in an advisory and developmental role and that the existing product lines would continue with Wilson Combat’s manufacturing and distribution behind them. It did not say where the pistols will be built. Guncrafter’s own website still describes the company as a Huntsville manufacturer.

For collectors, the documented record supports a few plain observations. Guncrafter pistols were built to order in a small shop, so configurations vary from one pistol to the next. The .50 GI models depend on a cartridge that, at least as of 2011, was loaded only by Guncrafter. Whether Huntsville-built pistols come to be regarded as a distinct period is a matter of interpretation, and it turns on production decisions Wilson Combat has not yet published.

Guncrafter Industries

History & Milestones

2002

Zimmermann Leaves Wilson Combat to Start Guncrafter

Alex Zimmermann resigned as Wilson Combat’s director of research and development to pursue a .50-caliber 1911. Two years of prototyping with Vic Tibbets followed.

2003

Company and Cartridge Name Are Registered

Zimmermann filed the 50 GI trademark application on 6 October, and Guncrafter Industries, L.L.C. was filed in Arkansas on 26 November.

2004

Model No. 1 Shown at SHOT Show

The pistol and the .50 GI cartridge were shown publicly in Las Vegas, with the pistol priced at $2,895.

2009

The American Adds a .45 ACP Model

The company announced The American, a railed .45 ACP 1911, as new for the year. The catalog now extended beyond the proprietary cartridge.

2010

Model No. 3 and No Name Arrive

The Commander-length Model No. 3 took the .50 GI into a carry-size pistol. The unmarked Pistol with No Name is dated to the same year.

2016

HOSS Reworks Seven Parts of the 1911

Guncrafter announced the HOSS, with a heavier extractor, slide stop, barrel and related parts.

2017

BC-17 Hellcat Introduces the BattleCrown Bushing

The company released its seventeenth 1911-pattern model, in four chamberings.

2018

Hellcat X2 Takes the Line Double-Stack

A May release announced the Hellcat X2 in 9mm and .40, the company’s first double-stack pistol in the sources reviewed.

2026

Wilson Combat Acquires the Guncrafter Brand

Wilson Combat announced the purchase of Guncrafter’s brand and assets in April, with Zimmermann staying on as an adviser.

Guncrafter Industries

Model Series & Product Lines

LUXUS
Model No. 1
Est. 2004

The original full-size 1911 in .50 GI, shown with the cartridge at the 2004 SHOT Show and also offered built in .45 ACP. A hand-fitted .45 ACP conversion unit was available for .50 GI pistols.

Model Overview
LUXUS
Model No. 2

A .50 GI Government model with a full-profile slide, full-length dust cover and integral accessory rail, weighing 42.6 oz without magazine. It is absent from the company’s site in August 2006 and present in January 2007.

Model Overview
LUXUS
Model No. 3

The Commander-length .50 GI, with a 4.25-inch bushingless bull barrel and bobbed frame, intended for carry.

Model Overview
LUXUS
Model No. 4

A six-inch long-slide .50 GI aimed at handgun hunting, which the company says allows heavier loads than the five-inch guns. American Rifleman tested one in 2016 at a starting MSRP of $4,125.

Model Overview
LUXUS
FRAG

A .45 ACP Government model whose front strap and mainspring housing carry a grenade-inspired pattern in place of checkering, with a brass bead front and U-notch rear sight.

Model Overview
LUXUS
HOSS

A 1911 with seven enlarged or redesigned parts: extractor, slide stop, plunger tube, ejector, barrel link, bushing and barrel.

Model Overview
LUXUS
BC-17 Hellcat

Government and Commander 1911s in 9mm, .38 Super, .45 ACP and 10mm (Government only), built around the BattleCrown bushing. Launch MSRP was $3,595.

Model Overview
LUXUS
Hellcat X2

The company’s double-stack pistol, in Government and Commander sizes in 9mm or .40, at a launch MSRP of $3,895. It uses 17-round STI-pattern magazines.

Model Overview
Guncrafter Industries

Available for Purchase

Shop All →