The 7.5 FK cartridge began as a written requirement. According to the company, a private customer asked in 2010 for a round between pistol and rifle calibers, with targets including supersonic flight at 150 meters, a group inside 100 x 100 mm at 100 meters, and a barrel no longer than 150 mm. Keith Wood, writing in American Rifleman, describes that customer as a private security company working in the Middle East that wanted a sidearm for engagements at roughly 50 to 100 meters. The requirement was canceled, and the company says it carried on because early tests showed accuracy potential; it dates the basic case design to 2011. It also states that four years of testing consumed more than 250,000 rounds, at least 15 case variations and over 30 bullet designs.
The legal entity came later. FK Brno Engineering s.r.o. was entered in the commercial register at the Regional Court in Brno on 9 August 2013, with Faisal Kedairy holding 95 percent and Miroslav Novák 5 percent; Novák was the first managing director. Development and manufacture of weapons and ammunition were added to its registered business in November 2013. Kedairy is the named inventor on a European patent for a recoil attenuating mechanism and a U.S. patent for a firearm cartridge, both claiming priority from 23 February 2015 and both held by Skychase Holdings Corporation. Skychase is a Delaware corporation with a Florida address, and it registered the 7,5 FK FIELD PISTOL mark in the United States in 2017. A U.S. design patent for the pistol was filed in Kedairy’s name on 6 March 2015. American Rifleman reported in 2016 that the inventor asked not to be named and that the venture had no reported ties to any former Brno gunmaker. The C.I.P. data sheet for the 7,5 FK, with the Czech Republic as country of origin, is dated 2015.
The Field Pistol was first shown at IWA in Nuremberg in 2015, and the company launched the production version there in 2016. Trade coverage of the 2016 show describes two variants, Combat and Sport, differing in beavertail and trigger guard. It is a single-action, tilting-barrel pistol in steel with a 152 mm barrel, weighing 1,300 g. The patent places the recoil spring assembly below the barrel axis and adds a moving weight on the spring rod to reduce muzzle climb. The company states that the design is not a modification of another model and that it built more than 40 prototypes. Wood and Zent both describe it as CZ 75-based or derived. The company lists a muzzle velocity of 610 m/s; Wood measured an average of 2,007 fps with the 95-grain load. In the United States, it was priced at $7,500 and distributed by FK Brno USA of Gainesville, Florida, and Wood reported that 1,001 units were destined for that market.
Cost and weight drove the next design. At SHOT Show 2019, the company said a polymer-framed pistol was in development to reduce both. The PSD debuted at IWA weeks later. It has a composite polymer frame, a 136 mm barrel, and weighs 1,100 g; it takes conversion barrels for 10 mm Auto and .40 S&W, with 9 mm as an option. Shooting Illustrated listed it at $1,650 in December 2020. A compact PSD-C was shown at IWA 2022 and appeared at SHOT Show in January 2023 alongside the lightened-slide PSD-SL. In July 2022, Italian Firearms Group of Amarillo, Texas, announced that it was the sole U.S. distributor.
The register also records the company’s financing and ownership. Share capital rose from CZK 400,000 to CZK 104.5 million in September 2015, and to CZK 373.4 million in May 2019. In March 2016, the sole shareholding passed from Kedairy to FK Brno Corporation a.s. In January 2025, the operating company was renamed Straky Machining s.r.o., and its shareholder is now recorded as Straky Corporation a.s.; on 12 June 2026, the name FK Brno Engineering s.r.o. was restored, with its seat at Řípská 1142/20 in Brno-Slatina. American Rifleman’s 2026 review states that the PSD-C is made in Brno.
The company’s website lists the Field Pistol, the PSD, and a 6.5 mm bolt-action rifle system. Early press described the Field Pistol as intended for military, law-enforcement and government users, but no adoption or contract was documented in any source consulted. Maxim Popenker puts the Field at about ten times the price of common 9 mm service pistols and judges it impractical for everyday carry. The 7.5 FK is C.I.P. certified but not SAAMI approved, so ammunition supply remains tied to the maker and its importer. For collectors, the steel Field Pistol is the reference piece. That judgment is ours, resting on its price and the reported U.S. allocation.
History & Milestones
Private customer commissions an intermediate pistol cartridge
The company dates the 7.5 FK to a 2010 request for a round between pistol and rifle calibers. American Rifleman identifies the customer as a private security company in the Middle East.
Basic 7.5 FK case design finalized
The manufacturer states that the case design and cartridge concept were settled in 2011, after the original requirement was canceled.
FK Brno Engineering registered in Brno
The company was entered in the commercial register on 9 August 2013 and is owned by Faisal Kedairy and Miroslav Novák. Weapons and ammunition work was added to its business scope in November.
Field Pistol first shown at IWA
The pistol and cartridge appeared at IWA in Nuremberg. Patent filings for the recoil mechanism and cartridge carry a February 2015 priority date, and the C.I.P. data sheet is dated the same year.
Production Field Pistol and new parent company
The production version was launched at IWA 2016 in Combat and Sport variants. On 30 March, the shareholding passed to FK Brno Corporation a.s.
Polymer-framed PSD debuts at IWA
The PSD brought a polymer frame, a shorter barrel, and caliber conversion to the 7.5 FK platform at a much lower price.
Compact PSD-C shown; U.S. importer appointed
The PSD-C was shown at IWA in March. In July, Italian Firearms Group announced that it was the sole U.S. distributor.
PSD-C and PSD-SL reach SHOT Show
The compact PSD-C made its U.S. debut alongside the lighter PSD-SL, at a reported MSRP of about $1,900 to $2,000.
Company renamed Straky Machining, later reversed
The register shows the operating company was renamed Straky Machining s.r.o. in January 2025, and the name FK Brno Engineering was restored on 12 June 2026.


